The content below regarding the approvals of Cummins vehicles for B10 has been compiled with the greatest possible care. Nevertheless, no guarantee can be given for the accuracy, completeness and up-to-dateness of the content provided. Use of the contents of this list is at your own risk. Before using biodiesel or fuels containing biodiesel, it is therefore strongly recommended that you obtain confirmation of approval from the respective vehicle or engine manufacturer and find out about any special maintenance and service requirements. Information can also be found in the vehicle's operating instructions or in the fuel filler cap.

(Status of the information: February 2024)

Cummins

Vehicle Engine Construction Year Emission Stage Remarks
n.i. F 2.8, F 3.8, F 4.5 from 01.2008 n.i. n.i.
n.i. B/D 3.3, B/D 3.9, B/D 4.5,
B/D 5.9, B/D 6.7
QSB		 from 01.2007 n.i. For Eliminator™ systems for longer oil change intervals, oil samples must be taken.
For marine applications, Cummins requires additional water separation equipment.
n.i. C/L, QSC, QSL n.i.
n.i. M11, QSM11 n.i. n.i.
n.i. G11, G12, N14 n.i. n.i.
n.i. X11.9, X15 from 01.2007 n.i. n.i.
n.i. ISX CM570 from 01.2002
 		 n.i. n.i.
n.i. K19, K23, K30, K38, K45, K50, K60, K78, K95
QSK19, QSK23, QSK30, QSK38, QSK45, QSK50, QSK60, QSK78, QSK95
QST19, QST23, QST30, QST38, QST45, QST50, QST60, QST78, QST95		 from 01.2008 n.i.

For Eliminator™ systems for longer oil change intervals, oil samples must be taken.
For marine applications, Cummins requires additional water separation equipment.

Engines with exhaust gas aftertreatment systems are only approved for B7 fuel.

n.i. = no indication

Source: QuickServe Online | Fluids for Cummins® Products Service Manual

Cummins Customer Care Europe (CCE)